Intel B85 Chipset Product Specifications 您所在的位置:网站首页 b85-btc bios Intel B85 Chipset Product Specifications

Intel B85 Chipset Product Specifications

2023-04-01 07:41| 来源: 网络整理| 查看: 265

All information provided is subject to change at any time, without notice. Intel may make changes to manufacturing life cycle, specifications, and product descriptions at any time, without notice. The information herein is provided "as-is" and Intel does not make any representations or warranties whatsoever regarding accuracy of the information, nor on the product features, availability, functionality, or compatibility of the products listed. Please contact system vendor for more information on specific products or systems.

Intel classifications are for informational purposes only and consist of Export Control Classification Numbers (ECCN) and Harmonized Tariff Schedule (HTS) numbers. Any use made of Intel classifications are without recourse to Intel and shall not be construed as a representation or warranty regarding the proper ECCN or HTS. Your company as an importer and/or exporter is responsible for determining the correct classification of your transaction.

Refer to Datasheet for formal definitions of product properties and features.

‡ This feature may not be available on all computing systems. Please check with the system vendor to determine if your system delivers this feature, or reference the system specifications (motherboard, processor, chipset, power supply, HDD, graphics controller, memory, BIOS, drivers, virtual machine monitor-VMM, platform software, and/or operating system) for feature compatibility. Functionality, performance, and other benefits of this feature may vary depending on system configuration.

“Announced” SKUs are not yet available. Please refer to the Launch Date for market availability.

Intel® Rapid Start Technology requires a select Intel® processor, Intel® software and BIOS update, and a Solid-State Drive (SSD) or hybrid drive. Depending on system configuration, your results may vary. Contact your system manufacturer for more information.

Intel® Standard Manageability requires activation and a system with a corporate network connection, an Intel® ME Firmware-enabled chipset, network hardware and software. For notebooks, Intel® ME Firmware may be unavailable or limited over a host OS-based VPN, when connecting wirelessly, on battery power, sleeping, hibernating or powered off. Results dependent upon hardware, setup & configuration. For more information, visit http://www.intel.com/technology/platform-technology/intel-amt

WARNING: Altering clock frequency and/or voltage may: (i) reduce system stability and useful life of the system and processor; (ii) cause the processor and other system components to fail; (iii) cause reductions in system performance; (iv) cause additional heat or other damage; and (v) affect system data integrity. Intel has not tested, and does not warranty, the operation of the processor beyond its specifications. Intel assumes no responsibility that the processor, including if used with altered clock frequencies and/or voltages, will be fit for any particular purpose. For more information, visit http://www.intel.com/content/www/us/en/gaming/overclocking/overclocking-intel-processors.html

System and Maximum TDP is based on worst case scenarios. Actual TDP may be lower if not all I/Os for chipsets are used.

Intel® Smart Response Technology requires a select Intel® Core™ processor, an enabled chipset, Intel® Rapid Storage Technology software, and a properly configured hybrid drive (HDD + small SSD). Depending on system configuration, your results may vary. Contact your system manufacturer for more information.



【本文地址】

公司简介

联系我们

今日新闻

    推荐新闻

    专题文章
      CopyRight 2018-2019 实验室设备网 版权所有